Inventory number: 14508
Toolmakers lathe
|
2 Image(s)
|
| Centre height | 115 | mm |
| Distance between centres | 500 | mm |
| Swing over cross-slide | 130 | mm |
| Swing over bed | 230 | mm |
| Spindle hole | 20 | mm |
| Taper in spindle: | 3 | MT |
| Spindle speeds: | ||
| number (steps) | 6 | |
| from | 130 | rpm |
| up to | 2000 | rpm |
| Taper in tailstock: | 2 | MT |
| Spindle diameter | 26 | mm |
| Spindle stroke | 40 | mm |
| Voltage 50 Hz 3x | 220 | Volt |
| Spindle motor | 0.75 | HP |
| Machine's weight about | 125 | kg |
| Overall dimensions machine: | ||
| Length | 1060 | mm |
| Width | 560 | mm |
| Height | 560 | mm |
| Various accessories: | ||
| On work bench: | ||
| 3-jaw chuck Ø | 100 | mm |
| 4-jaw chuck Ø | 200 | mm |
| Chuck flange Ø | 190 | mm |
| Set of gears | ||
| Set of centres | ||
| Toolholders | ||
| Travelling steady | ||
| Fixed steady |
Pdf (Print)
Information request
