Inventory number: 14917
CNC turning lathe
|
6 Image(s)
|
| Swing over bed | 519.2 | mm |
| Spindle hole | 51 | mm |
| Turning diameter | 308.6 | mm |
| Carriage: | ||
| Longitudinal travel (Z-axis) | 609 | mm |
| Transversal strocke (X axis) | 189 | mm |
| Turret slide: number | ESA EPPINGER | |
| Number of positions turret 1 | 12 | |
| Driven tools turret 1 | 12 | |
| Taper in tailstock: | ||
| Morse taper | 4 | MT |
| Feeds: | ||
| longitudinal from | 0 | mm/r |
| up to | 38 | mm/r |
| transversal from | 0 | mm/r |
| up to | 28 | mm/r |
| Voltage 50 Hz 3x | 230 | Volt |
| Machine's weight about | 5555 | kg |
| Overall dimensions machine: | ||
| Length | 3000 | mm |
| Width | 2000 | mm |
| Height | 1905 | mm |
| Various accessories: | ||
| 3-jaw chuck Ø | (HM 308) 200 | mm |
| Set of jaws | ||
| Set of jaws hard | ||
| Lamp | ||
| Hydraulic tailstock | ||
| Internal coolant supply | ||
| Rotary centre | ||
| C axis | ||
| Y axis | ||
| Chip conveyor | ||
| Tool holder radial (nbr.) | 6 | |
| Driven tool holder radial (nbr.) | 1 | |
| Tool holders axial (nbr.) | 4 | |
| Driven tool holder axial (nbr.) | 1 | |
| Air Blast |
Pdf (Print)
Information request
