Inventory number: 16349
CNC turning lathe
|
8 Image(s)
|
| Centre height | 125 | mm |
| Swing over cross-slide | 115 | mm |
| Swing over bed | 200 | mm |
| Spindle hole | 40 | mm |
| Turning diameter | 200 | mm |
| Pitch of leadscrew | 5 | mm |
| Diameter of leadscrew | 20 | mm |
| Carriage: | ||
| Longitudinal travel (Z-axis) | 410 | mm |
| Transversal strocke (X axis) | 190 | mm |
| Taper in spindle: | ||
| Camlock | D1-3''/B32 | |
| Inner taper type | B 32 | |
| Collet bore | 24 | mm |
| Spindle speeds: | ||
| stepless | ||
| from | 50 | rpm |
| up to | 5000 | rpm |
| Taper in tailstock: | ||
| Morse taper | 2 | MT |
| Spindle stroke | 100 | mm |
| Spindle diameter | 35 | mm |
| Voltage 50 Hz 3x | 400 | Volt |
| Spindle motor | 5.5 | kW |
| Machine's weight about | 1120 | kg |
| Overall dimensions machine: | ||
| Length | 1480 | mm |
| Width | 1200 | mm |
| Height | 1490 | mm |
| Various accessories: | ||
| 3-jaw chuck Ø | (RÖHM) 125 | mm |
| 3-jaw chuck Ø | 125 | mm |
| Collet device | ||
| Set of collets | B 32 | |
| Lamp | ||
| Tailstock | ||
| Coolant system | ||
| Full splash cabin | ||
| Pneum. quick closing attach. | ||
| Handwheel electroinic | ||
| Set of toolholders | MULTIFIX | |
| Toolholders | 3x 16-16 | |
| Set of toolholders | ||
| Milling attachment | ESX 20 | |
| Tool holder for boring bars | 2 x Ø 20 mm | |
| Rear tool-holder stand |
Pdf (Print)
Information request
