Inventory number: 16730
Centre lathe
|
7 Image(s)
|
| Centre height | 200 | mm |
| Distance between centres | 750 | mm |
| Swing over cross-slide | 245 | mm |
| Swing over bed | 405 | mm |
| Swing in gap | 500 | mm |
| Length of the gap | 180 | mm |
| Spindle hole | 38 | mm |
| Taper in spindelstock metric | 50 | |
| Taper in spindle: | ||
| Camlock | D5" | |
| Spindle speeds: | ||
| number (steps) | 13 | |
| from | 28 | rpm |
| up to | 1800 | rpm |
| Pitch of leadscrew | 6 | mm |
| Taper in tailstock: | 4 | MT |
| Spindle stroke | 150 | mm |
| Feeds: | ||
| number (steps) | 48 | |
| length: | ||
| from | 0.029 | mm/r |
| up to | 1.60 | mm/r |
| Frontal: | ||
| from | 0.022 | mm/r |
| up to | 1.25 | mm/r |
| Voltage 50 Hz 3x | 380 | Volt |
| Spindle motor | 5.2 / 7.3 | kW |
| Machine's weight about | 1800 | kg |
| Overall dimensions machine: | ||
| Length | 3200 | mm |
| Width | 1300 | mm |
| Height | 1600 | mm |
| Various accessories: | ||
| 3-jaw chuck Ø | 145 | mm |
| Coolant system | ||
| Chuck adaptor | ||
| Set of centers | ||
| Tool cabinet | ||
| Set of gears | ||
| Set of tools |
Pdf (Print)
Information request
