Inventory number: 16861
Centre lathe
|
6 Image(s)
|
| Centre height | 200 | mm |
| Distance between centres | 1000 | mm |
| Swing over cross-slide | 235 | mm |
| Swing over bed | 425 | mm |
| Spindle hole | 55 | mm |
| Taper in spindelstock MK | 4 | |
| Spindle speeds: | ||
| number (steps) | 16 | |
| from | 35 | rpm |
| up to | 1800 | rpm |
| Pitch of leadscrew | 6 | mm |
| Taper in tailstock: | 4 | MT |
| Feeds: | ||
| number (steps) | 40 | |
| length: | ||
| from | 0.05 | mm/r |
| up to | 2.8 | mm/r |
| Frontal: | ||
| from | 0.05 | mm/r |
| up to | 2.8 | mm/r |
| Voltage 50 Hz 3x | 380 | Volt |
| Spindle motor | 5 | HP |
| Machine's weight about | 2000 | kg |
| Overall dimensions machine: | ||
| Length | 2000 | mm |
| Width | 1000 | mm |
| Height | 1300 | mm |
| Various accessories: | ||
| 3-jaw chuck Ø | 260 | mm |
| Set of jaws hard | ||
| Digital readout number of axis: | 2 | |
| Manufacturer | HEIDENHAIN | |
| Coolant system | ||
| Tool holder with elements | ||
| Drill chuck | ||
| Lamp | ||
| Drilling tailstock |
Pdf (Print)
Information request
