Número de existencias: 14805
Prensa de inyecctar plastico
|
6 Imágenes
|
| Load on injection plunger | 20,4 | g |
| Pressure on material | 2224 | bar |
| Screw diameter | 18 | mm |
| Screw speeds, steps: | ||
| from | 0 | rpm |
| up to | 510 | rpm |
| Clamping force | 350 | kN |
| Opening force | 131,9 | kN |
| Table surface: | ||
| Length | 550 / 482 | mm |
| Width | 650 / 480 | mm |
| Distance between columns: | ||
| vertical | 304 x 204 | mm |
| Distance between platens | 325 | mm |
| Electrical supply: | ||
| Voltage | 380 | Volt |
| Mould heating | 3,16 | kW |
| Total power required | 7,5 | kW |
| Machine's weight about | 2200 | kg |
| Overall dimensions machine: | ||
| Length | 2600 | mm |
| Width | 1500 | mm |
| Height | 3800 | mm |
Pdf (Imprimir)
Petición de informaciones
