Инвентарный номер: 16491
Centre lathe
|
4 Изображения
|
| Centre height | 225 | mm |
| Distance between centres | 1000 | mm |
| Swing over cross-slide | 300 | mm |
| Swing over bed | 450 | mm |
| Spindle hole | 76 | mm |
| Taper in spindle: | ||
| Camlock | 6" D1 | |
| Spindle speeds: | ||
| number (steps) | 16 | |
| from | 20 | rpm |
| up to | 2000 | rpm |
| Pitch of leadscrew | 6 | mm |
| Taper in tailstock: | 5 | MT |
| Feeds: | ||
| length: | ||
| from | 0.06 | mm/r |
| up to | 3.5 | mm/r |
| Frontal: | ||
| from | 0.06 | mm/r |
| up to | 3.5 | mm/r |
| Voltage 50 Hz 3x | 380 | Volt |
| Spindle motor | 10 | HP |
| Total power required | 10.5 | HP |
| Machine's weight about | 2200 | kg |
| Overall dimensions machine: | ||
| Length | 2500 | mm |
| Width | 1000 | mm |
| Height | 1500 | mm |
| Various accessories: | ||
| 3-jaw chuck Ø | mm | |
| 4-jaw chuck Ø | mm | |
| Manufacturer | ||
| Chuck adaptor | ||
| Set of toolholders | ||
| Set of centers | ||
| Rotary centre | ||
| Drill chuck |
Pdf (Печать)
Запрос информации
