Инвентарный номер: 16769
Centre lathe
|
5 Изображения
|
| Centre height | 190 | mm |
| Distance between centres | 760 | mm |
| Swing over cross-slide | 240 | mm |
| Swing over bed | 390 | mm |
| Swing in gap | 570 | mm |
| Spindle hole | 54 | mm |
| Taper in spindelstock MK | 4 | |
| Taper in spindle: | ||
| Camlock | 6" D1 | |
| Spindle speeds: | ||
| number (steps) | 16 | |
| from | 25 | rpm |
| up to | 2000 | rpm |
| Taper in tailstock: | 4 | MT |
| Feeds: | ||
| length: | ||
| from | 0.04 | mm/r |
| up to | 1.00 | mm/r |
| Frontal: | ||
| from | 0.02 | mm/r |
| up to | 0.50 | mm/r |
| Voltage 50 Hz 3x | 380 | Volt |
| Spindle motor | 7.5 | HP |
| Machine's weight about | 1150 | kg |
| Overall dimensions machine: | ||
| Length | 2000 | mm |
| Width | 1000 | mm |
| Height | 1500 | mm |
| Various accessories: | ||
| Face plate diameter | 380 | mm |
| 3-jaw chuck Ø | 200 | mm |
| Chuck adaptor | ||
| Set of toolholders | ||
| Rear tool-holder stand |
Pdf (Печать)
Запрос информации
