Инвентарный номер: 16777
Bed type milling machine
|
14 Изображения
|
| Table length | 1500 | mm |
| Table width | 500 | mm |
| Longitudinal travel (X-axis) | 1250 | mm |
| Transversal travel (y axis) | 650 | mm |
| Vertical travel (z axis) | 750 | mm |
| Execution: universal milling head | ||
| Distance from spindle | ||
| to table | 640 | mm |
| Taper in spindle | 50 | ISO |
| Spindle speeds: | ||
| number (steps) | 4 | |
| stepless | ||
| from | 20 | rpm |
| up to | 2000 | rpm |
| Feeds: | ||
| stepless | ||
| longitudinal from | 1 | mm/min |
| up to | 1500 | mm/min |
| transversal from | 1 | mm/min |
| up to | 1500 | mm/min |
| vertical from | 1 | mm/min |
| up to | 1500 | mm/min |
| Rapid traverse: | ||
| longitudinal | 3600 | m/min |
| transversal | 3600 | m/min |
| vertical | 3600 | m/min |
| all axis | 5.0 | m/min |
| Voltage 50 Hz 3x | 380 | Volt |
| Milling spindle motor | 13.0 | kW |
| Feed motor | 3 | kW |
| Machine's weight about | 6500 | kg |
| Overall dimensions machine: | ||
| Length | 2200 | mm |
| Width | 2000 | mm |
| Height | 2200 | mm |
| Various accessories: | ||
| Dividing attachment: centre height | 220 | mm |
| Vice: width | 160 | mm |
| Vertical milling-head | ||
| Hydraulic tool-tension | ||
| Steady | ||
| Set of cutter arbors | ||
| Set of short cutter arbors | 20 | |
| Set of long cutter arbors | 4 | |
| Set of collets | ||
| Coolant system | ||
| Angle milling head | ||
| Turn-out heads Quantity | 1 | |
| Tool cabinet | ||
| Collet chuck (number) | 5 | |
| Set of clamping tools | ||
| Automatic central lubrication | ||
| Electronic hand held control | ||
| Interface serial port RS 232 |
Pdf (Печать)
Запрос информации
