Инвентарный номер: 9638
Jig boring machine
|
4 Изображения
|
| Table length | 600 | mm |
| Table width | 380 | mm |
| Longitudinal travel (X-axis) | 400 | mm |
| Transversal travel (y axis) | 250 | mm |
| Vertical travel (z axis) | 450 | mm |
| Table load max. | 300 | kg |
| Drill capacity in steel | 30 | mm |
| Taper in spindle: ISO | 30 | |
| Stroke of drilling spindle (Z-axis) | 140 | mm |
| Bore diameter max. | 220 | mm |
| Distance table to spindle | 0 - 550 | mm |
| Spindle speeds: | ||
| stepless | ||
| from | 30 | rpm |
| up to | 4000 | rpm |
| Feeds: | ||
| from | 500 | mm/min |
| up to | 1000 | mm/min |
| Drill spindle slide: | ||
| number (steps) | 4 | |
| from | 0.01 | mm/r |
| up to | 0.23 | mm/r |
| Voltage 50 Hz 3x | 380 | Volt |
| Machine's weight about | 1035 | kg |
| Various accessories: | ||
| Manufacturer | ELESTA Visulesta II | |
| Coolant system | ||
| Drill chuck | ||
| Boring head | ||
| Tool cabinet | ||
| Centering device | ||
| Centering microscop | ||
| Set of collets | E 32 (18x) | |
| Collet chuck (number) | E 32 (47x) | |
| Lamp | ||
| Electronic hand held remote control |
Pdf (Печать)
Запрос информации
