stock no. :
20980
Machine's group :
CNC Internal grinder
Type :
STUDER S 145 CNC
Controller :
GE FANUC Series 16-T
Information request
STUDER S 145 CNC 5 Image(s)
Back
Technical data
Swing diameter:
    Above the workpiece table
350 mm
    In front of the workpiece table
455 mm
Centre height
175 mm
Workpiece length max.
530 mm
Axial motion:
    Longitudinal travel (Z-axis)
500 mm
    cross travel (x axis)
120 mm
    Work piece spindle head (B-axis)
+ / -30°
Feed range:
    X axis (transversal)
0.001-10000 mm/min
    Z axis (longitudinal travel)
0.001-10000 mm/min
C axis (spindle,resolution)
0.0001 °
Grinding spindle head:
    Swivelling range
0 - 270 °
    Number of positions
4
    speeds:
       stepless
       from
5000 rpm
       up to
120000 rpm
Work piece spindle head:
    speeds:
       stepless
       from
1 rpm
       up to
1000 rpm
    Typing speed
1 - 50 rpm
    Spindle hole
50 mm
    taper in spindle: ISO
50
Work piece spindle nose CAMLOCK
6
Voltage 50 Hz 3x
400 Volt
Workpiece spindle motor
3.8 kW
Total power required
22 kVA
Machine's weight about
5700 kg
Overall dimensions machine:
    Length
3000 mm
    Width
2000 mm
    Height
2200 mm
Various accessories:
B axis resolution max.
0.001 °
Wheel trueing attachment
Electronic grinding detection
Thread grinding cycles
Coolant system
Paper filter facility
Full splash cabin
Lamp
Status light
3-jaw chuck diameter
mm
Electronic hand held control
Interface serial port RS 232

Technical specifications and pictures without guarantee.

Information request
STUDER S 145 CNC
stock no. 20980

Please fill out the following field correctly
Please fill out the following field correctly
Please fill out the following field correctly
Please fill out the following field correctly
Please fill out the following field correctly
Send